- High intensity illumination with complete ring fiber optic light system. This 150W variable intensity microscope illumination system enhances overall viewing of specimens. It is a great benefit for use with video microscopy and digital microscope photography.
|
| Camera Equipment Included |
- Total Video - Photography Solution! Includes two cameras! Get a USB computer connected color digital microscope camera plus a CCD video camera for NTSC analog output to a TV. This is an incredible deal as these cameras are normally sold separately for hundreds of dollars. They are fully integrated into the microscope so you don’t need to waste time trying to figure out what accessories may be needed for video or photography.
- Includes the required photography accessories such as phototube and c-mount for attaching each different camera. The included expensive accessories are normally sold separately.
- Camera #1: USB Camera for Connection to Computer!
- Reduction Lens System built into the camera. This lens system is important to give a more realistic image that isn’t too magnified.
- Capture Live Full Motion Digital Video!
- Capture Stunning 640×480 and 320×240 Pixel Digital Still Images!
- Simple to Use. Plug Camera into Your Computer’s USB Port, Load the Software, and You’re Taking Images!
- Great for Viewing Specimens and Displaying on a Computer!
- Everything You Need: Microscope, Camera, Easy-to-Use Windows Capture and Editing Software, USB Cable. You Provide Only the Computer.
- Camera #2: Video Microscopy Solution! CCD Color Video Camera with NTSC (or PAL is desired) format analog output for connection to CCTV monitor or to normal Television!
- The CCTV Display Monitor is Not Included.
- Works on most Televisions and VCR’s for Viewing and Recording of Full Motion Video!
- CCD Camera Details: 1/3 Inch CCD Color Video Camera, NTSC Video Output Format, 420 Horizontal Lines Resolution, Low Light Requirement, with power supply and video cable with RCA jack (most TV’s and VCR’s have RCA inputs).
|
- Mobile Floor Stand with Spring Loaded Articulating Boom Arm!
- Base has six Rolling Wheels with ability to Lock Position.
- This Boom Stand provides Multi-Axis Rotation so the Scope’s Head can be rotated to most any angle or position.
- Superior Ergonomically Designed Articulating Arm puts Optics right where you Need It!
- This boom gives great flexibility, allowing the head to be raised, lowered, pulled over the working area, or pushed out of the way when not used.
- The Ultimate Working Tool for Detailed Viewing Applications!
- Includes a Focusing Holder for mounting the Microscope Head.
- Great Discounted Price! This would normally cost Hundreds More!
|
| Eyepieces and Magnification |
- Zoom Range 3.5 - 90x Continuous Magnification (using both eyepiece sets and with and w/o bottom lens).
- Wide Field 10x and Wide Field 20x Eyepiece Sets Included.
- Includes 0.5x Bottom Lens. This lens decreases magnification and approximately doubles working distance. A greater working distance allows more room to get your hands and tools under the scope head.
|
- Ring Fiber Optic Illumination System, 150 Watt Halogen, Variable Intensity.
- Includes Shelf Support for Fiber Optic Illuminator.
|
| Head - Interpupillary Distance - Diopter |
- 45 Degree Inclined Trinocular Head, Rotatable 360 Degrees.
- Adjusts to the Distance Between your Eyes: 55 to 75mm InterPupillary Distance.
- Diopter Adjustment on Both Oculars to Correct for Your Specific Vision Needs.
|
| Focusing and Working Distance |
- Focusing Knobs on Both Sides of Focusing Holder to Raise/Lower Head into Focus.
- Rack and Pinion Steel Gears to Raise/Lower Focusing Holder.
- Working Distance, 92mm - w/o Bottom Lens on, (131mm w/ Bottom Lens on), This is the distance under the scope head as it is in focus. This is a reasonably good distance to allow room for hands and tools under the scope.
|
| Frame - Base - Size - Weight |
- Adjustable Height! Easily Adjust Height of Unit by Sliding an Inner Shaft Up or Down as Needed! Incredible 2 Feet (610mm) Vertical Sliding Travel. This puts the Total Extended Height (highest point) at an Incredible 6.5 Feet (About 2 Meters).
- Versatile Elevation Adjustment Range for Scope Head: 26 to 67 Inches from Floor to Bottom of Scope Lens.
- Spring Loaded Articulating Arm with Vertical Travel (Rise) of 18.5 Inches (470mm).
- Maximum Horizontal Extension (center of stand to center of focusing holder where scope head sits) 37 Inch (950mm).
- Multiple Points of Flexibility and Movement, Each of which can be Locked into Place.
- Extra Wide Base and Six Legs for Maximum Stability. (30 Inchs end to end of legs).
- Floor Rollers have Locking Mechanism to Prevent Movement when Engaged.
- Frame/Stand Made of Solid Steel for Durability and Stability.
- Total Floor Stand and Articulating Arm Weight (w/o Scope Head or Illumination System): 80 LBS.
|
- Includes Rubber Eye Guards for Blocking Stray Light.
- Includes Dust Cover.
- Includes phototube with standard 23mm internal diameter for attaching standard microscope photography equipment.
- Includes 1x c-mount for attaching standard ccd video camera equipment.
|
- Ships in Molded Styrofoam Container for protection.
- Manufactured under ISO: 9001 Standards.
- 110 VAC Power Requirement (Contact us about 220V availability).
- High Quality Solid Construction!
- Precision Made Glass Optics!
- Brand New, Never Used!
|
- Warranty! The Quality of the product is Assured! You are covered by a 5 Year Warranty on microscope equipment!
|
- Optional c-mount with reduction lens for mounting to the trinocular port and attaching the ccd camera. This only affects the ccd video camera and not other photography equipment. It will reduce the ccd camera magnified image through the microscope trinocular photography port.
|
